Heat Exchangers - Lime
Scale Removal
Heat exchangers in many manufacturing facilities are very
crucial in everyday operations. Heat exchangers are designed to transfer heat
in the form of kinetic energy from one liquid to another. And while
transferring heat, the heat exchanger, over a period of time will collect lime,
scale and rust on the waterside of the
exchanger.
With
Dynamic
Descaler® lime scale removal, water scale removal, rust
removal, you do not have to dismantle or remove the unit from your
operations. You may want to install a system, which will inject
Dynamic
Descaler® into your water supply on a regular basis for
your cooling tower, chiller, or your closed loop water system. This
procedure will eliminate downtime in your everyday operations while
cleaning out your exchanger.
Instructions for Dynamic Descaler®
Cleaning
If you just intend to clean out the
heat exchanger, you still do not have to dismantle or remove the
exchanger from your operations.
1. By-pass heat exchanger from
operation.
2. Remove the existing
water in the exchanger. This MUST be done, to insure proper
results.
3. Disconnect the water
in/out connections from the exchanger.
4. Attach the necessary
hoses to in/out connections on the exchanger to a circulating pump. Refer
to chart (see download) for necessary circulation of time and the amount
of Dynamic
Descaler® to be used.
5. Once the circulation
has been completed, flush the exchanger with water to remove any
insoluble material.
